Thiết kế 3D
Diễn đàn này dành cho tất cả mọi người, các bài viết ở đây bất kỳ ai cũng đọc được, không phân biệt thành viên hay không.
Bạn chưa là thành viên. Mời bạn đăng ký để được viết bài và nêu các thắc mắc tại Diễn Đàn. Chúng ta cùng học tập lẫn nhau.
Ai cũng có thể làm thầy, ai cũng là học trò.

Thiết kế 3D

Sử dụng các phần mềm thiết kế 3D từ người mới học đến chuyên nghiệp
Trang ChínhRevit ArchitectTrợ giúpTìm kiếmThành viênNhómĐăng kýĐăng NhậpTrang Web chính thức

Share | 

 Concrete cladding panels as curtain walls

Go down 
Tác giảThông điệp

Tổng số bài gửi : 1646
Points : 3712
Reputation : 194
Join date : 07/04/2009

Bài gửiTiêu đề: Concrete cladding panels as curtain walls    25/5/2011, 15:08

Concrete cladding panels as curtain walls

I showed the image below on a blog post from last year and back then somebody did question how I put it together. I've updated the model for RAC 2009 as I was keen to see how it would render, so this post is really a follow on from the initial question.


The example is actually a proof of concept. I was at an Autodesk Tech Camp event in Europe last year, when somebody from one of Autodesk distribution companies showed me an example of a project in Denmark called the Light*house. They asked me whether I thought it was possible in Revit? Always up for a challenge and more than happy to share my ideas, I opened up my laptop and within an hour I'd come up with this. The panels are not parametric, although if I'd spent more time, I'm sure I could have made them as such.
How they where created

I started with a generic family, which included an extrusion and a void extrusion to get the initial shape of the curtain wall panel. I made sure that the family was built around a series of reference planes based on the end size of the resulting panel.

The resulting generic family was then loaded into a curtain wall panel family. I then locked and aligned the generic family to the curtain wall panel families reference planes.

I also added a double horizontal control which allows me to flip the panels where required within the curtain system.

Next I started a new project and created a curtain wall system. I then modified the system to the exact sizes of the previously created panel.

I then loaded in my custom curtain wall panel and swapped out the default glass panel for my panel. By default all the panel will be in the same direction on plan. So to get the flowing stepping "in and out" that the facade required, I just flipped every other panel, as per the image below.

As the curtain wall system only spanned between two levels, I copied the system already created up to the second level. I then adjusted the panels to meet the requirements of the pattern at the second level. Once completed the two systems where copied up to complete the image below, it was as simple as that!

Posted by David Light
Về Đầu Trang Go down
Xem lý lịch thành viên
Concrete cladding panels as curtain walls
Về Đầu Trang 
Trang 1 trong tổng số 1 trang

Permissions in this forum:Bạn không có quyền trả lời bài viết
Chuyển đến