Thiết kế 3D
Diễn đàn này dành cho tất cả mọi người, các bài viết ở đây bất kỳ ai cũng đọc được, không phân biệt thành viên hay không.
Bạn chưa là thành viên. Mời bạn đăng ký để được viết bài và nêu các thắc mắc tại Diễn Đàn. Chúng ta cùng học tập lẫn nhau.
Ai cũng có thể làm thầy, ai cũng là học trò.
Thân
Admin
Thiết kế 3D
Diễn đàn này dành cho tất cả mọi người, các bài viết ở đây bất kỳ ai cũng đọc được, không phân biệt thành viên hay không.
Bạn chưa là thành viên. Mời bạn đăng ký để được viết bài và nêu các thắc mắc tại Diễn Đàn. Chúng ta cùng học tập lẫn nhau.
Ai cũng có thể làm thầy, ai cũng là học trò.
Thân
Admin
Thiết kế 3D
Bạn có muốn phản ứng với tin nhắn này? Vui lòng đăng ký diễn đàn trong một vài cú nhấp chuột hoặc đăng nhập để tiếp tục.

Thiết kế 3D

Sử dụng các phần mềm thiết kế 3D từ người mới học đến chuyên nghiệp
 
Trang ChínhRevit ArchitectTìm kiếmLatest imagesĐăng kýĐăng NhậpTrang Web chính thức

 

 Creating a sweep that wraps around the wall end

Go down 
Tác giảThông điệp
Admin
Admin
Admin


Tổng số bài gửi : 1649
Points : 3721
Reputation : 194
Join date : 07/04/2009

Creating a sweep that wraps around the wall end Empty
Bài gửiTiêu đề: Creating a sweep that wraps around the wall end   Creating a sweep that wraps around the wall end I_icon_minitime7/4/2013, 08:08

Creating a sweep that wraps around the wall end

One of my customer was trying to create a wall sweep that swept around the wall end like below:

Creating a sweep that wraps around the wall end Wall+sweep-wrap+end-render
He had tried both the wall sweeps both in the wall sectional view and wall sweeps as host sweep, but the results he get was like below: Creating a sweep that wraps around the wall end Wall+sweep-normal

After some trial end error, I realised that the best way to achieve the right results is through using wall sweep as host sweep.

1. First add wall sweep as host sweep onto the wall on both exterior and interior sides as shown above.


2. Pick on the wall sweep on one side to display the options. Creating a sweep that wraps around the wall end Wall+sweep-return+90

3. Pick on the highlighted end region to turn the end 90 degrees.

Creating a sweep that wraps around the wall end Wall+sweep-return+90-2

4. Pick on the end again to display the grip.

Creating a sweep that wraps around the wall end Wall+sweep-show+grip

5. Grab the grip and drag the end towards the center of wall end. Creating a sweep that wraps around the wall end Wall+sweep-grip+center

6. Do likewise for the sweep on interior side. Then use Join Geometry to join them together. Creating a sweep that wraps around the wall end Wall+sweep-join+sweep

7. Repeat the same procedure for the other wall sweeps and you get the fantastic results as shown below.

Creating a sweep that wraps around the wall end Wall+sweep-finish

8. To get the exterior finish to wrap round the wall end, you must make sure that Wall Structure must be set so that the Wrapping at Ends is set to Exterior.


Creating a sweep that wraps around the wall end Wall+sweep-property

Some people may ask me why don't I just use the wall sweep in the wall sectional view. It is simple. You can do the same procedure with the wall sweep added in wall sectional properties. However, you cannot use Join Geometry onto the returned wall sweeps.

Source: http://revitbimmer.blogspot.com
Về Đầu Trang Go down
https://th3d.forumvi.com
 
Creating a sweep that wraps around the wall end
Về Đầu Trang 
Trang 1 trong tổng số 1 trang
 Similar topics
-
» Wall:Sweep
» Creating a Solid Railing
» Chuyên đề về tường - wall
» Creating Title Block From AutoCAD Sheet
» Creating Piping Systems in REVIT Part 1

Permissions in this forum:Bạn không có quyền trả lời bài viết
Thiết kế 3D :: CHUYÊN NGÀNH REVIT :: AUTODESK REVIT THEO CHUYÊN ĐỀ :: Chuyên đề tường-
Chuyển đến